Cisco Cisco IOS Software Release 12.4(2)XB6 Références techniques
-129
Cisco Broadband Wireless Gateway 2.0 Command Reference, IOS Release 12.4(24)YG
OL-14681-01
Chapter Cisco Broadband Wireless Gateway 2.0 Command Reference, IOS Release 12.4(24)YG
sdu-size
sdu-size
To configure the parameter that represents the number of bytes in the fixed size Service Data Unit (SDU),
use the sdu-size subcommand in service flow QoS information configuration submode. Use the no form
of the command to disable this feature.
use the sdu-size subcommand in service flow QoS information configuration submode. Use the no form
of the command to disable this feature.
sdu-size sdu-size-value
no sdu-size
Syntax Description
Defaults
The sdu-size-value default value is 49 bytes.
Command Modes
Service flow QoS information configuration submode.
Command History
Examples
The following example illustrates how to configure the sdu-size command:
wimax agw service-flow qos-info profile isf-qos-downlink
data-delivery-service real-time-variable-rate
maximum-latency 1
maximum-traffic-burst 2
maximum-traffic-rate-sustained 3
media-flow-type 012041424344
minimum-traffic-rate-reserved 4
policy-transmission-request 5
sdu-size 6
tolerated-jitter 7
traffic-priority 1
unsolicited-interval-grant 8
unsolicited-interval-polling 9
wimax agw service-flow qos-info profile isf-qos-uplink
data-delivery-service unsolicited-grant
maximum-latency 11
maximum-traffic-burst 21
maximum-traffic-rate-sustained 31
minimum-traffic-rate-reserved 41
policy-transmission-request 51
sdu-size 61
tolerated-jitter 71
traffic-priority 3
sdu-size-value
Specifies the number of bytes in the fixed size SDU. You can use this
parameter for a UGS service flow when the length of IP packets on the data
plane is fixed, and known in advance (this is typically the case for flows
generated by a specific codec). The range is 0-255. The default value is 49
bytes.
parameter for a UGS service flow when the length of IP packets on the data
plane is fixed, and known in advance (this is typically the case for flows
generated by a specific codec). The range is 0-255. The default value is 49
bytes.
Release
Modification
12.4(15)XL
This command was introduced.