Cisco Cisco IOS Software Release 12.4(22)XR Références techniques
13
Command Reference for Cisco PDSN Release 5.2 in IOS Release 12.4(22)XR4
OL-21586-01
cdma pdsn a10 ahdlc prefragment
cdma pdsn a10 ahdlc prefragment
To enable the packet fragmentation using the PPP method, use the CLI command cdma pdsn a10 ahdlc
prefragment in global configuration mode. To disable PPP fragmentation, use the no form of this
command.
prefragment in global configuration mode. To disable PPP fragmentation, use the no form of this
command.
cdma pdsn a10 ahdlc prefragment
no cdma pdsn a10 ahdlc prefragment
Syntax Description
There are no keywords or variables for this command.
Defaults
The default behavior is that packet fragmentation is done in PPP method using the AHDLC frames.
Command Modes
Global configuration.
Command History
Usage Guidelines
If you use the no form of this command, the packets are fragmented at the IP layer. In other words, the
fragmentation occurs only at IP/GRE/AHDLC (PPP/IP) layer and not at the AHDLC layer.
fragmentation occurs only at IP/GRE/AHDLC (PPP/IP) layer and not at the AHDLC layer.
Examples
The following example shows how to enable the PDSN so that the packet fragmentation is done using
PPP method:
PPP method:
Router (config)# cdma pdsn a10 ahdlc prefragment
Release
Modification
12.3(14)YX
This command was introduced.