Cisco Cisco IOS Software Release 12.4(22)XR Références techniques
27
Command Reference for Cisco PDSN Release 5.2 in IOS Release 12.4(22)XR4
OL-21586-01
cdma pdsn a11 reject airlink-start active
cdma pdsn a11 reject airlink-start active
To enable the PDSN to send RRP (with error code “86H-Poorly formed request”) when the RRQ is
received with airlink-start in the Acct CVSE from PCF for an active session, use the cdma pdsn a11
reject airlink-start active command in global configuration mode. Use the no form of the command to
disable this feature.
received with airlink-start in the Acct CVSE from PCF for an active session, use the cdma pdsn a11
reject airlink-start active command in global configuration mode. Use the no form of the command to
disable this feature.
cdma pdsn a11 reject airlink-start active
no cdma pdsn a11 reject airlink-start active
Syntax Description
There are no keywords or variables for this command.
Defaults
No default values.
Command Modes
Global configuration
Command History
Examples
The following example shows how to enable the cdma pdsn a11 reject airlink-start active command:
Router(config)# cdma pdsn a11 reject airlink-start active
Release
Modification
12.3(11)YR
This command was introduced.