Cisco Cisco IOS Software Release 12.4(2)XB6
Release Notes for Cisco IOS Release 12.4(24)GC2
Recommended Configuration Settings
3
Release Notes for Cisco IOS Release 12.4(24)GC2
Use the following command to display active PPPoE sessions:
•
show pppoe session
Use the following command to examine QoS issues:
•
show queue virtual-access interface-number
Use the following commands to debug vmi issues:
•
debug vmi error
•
debug vmi pppoe
Use the following commands to verify PPPoE and VMI interface operation related to credit information:
•
show vmi neighbor detail
•
show pppoe session all
Use the following command to debug PPPoE issues:
•
debug pppoe error
Use the following command to display OSPFv3 traffic data including LSA counts:
•
show ipv6 ospf traffic
Use the following command to display EIGRP traffic data:
•
show ip eigrp traffic [as-number]
The following command is not supported, but may be useful in debugging EIGRP MANET metric issues:
•
debug eigrp neighbor
Use the following command to collect data when reporting ROMMON issues:
•
showmon
Complete the following procedure to collect data if a router reboot to rommon occurs:
1.
dir flash: - Use to locate the Route Processor (crashinfo*)
or Network Processor (pxf_crashinfo*)
exception file.
2.
E-mail the exception file with a write up to the Cisco Beta support email address.
Recommended Configuration Settings
Use the following configuration guidelines when enabling fair-queuing:
•
Enter the following command to turn off creation of virtual-template subinterfaces:
no virtual-template number
•
Enter the following commands to create a policy map with class-default using fair-queuing:
policy-map FQ
class class-default
fair-queue
•
Enter the following commands to apply the newly created policy-map to the virtual template
interface virtual-template number
service-policy output FQ
•
No additional configuration is supported on the policy-map.