Cisco Cisco IOS Software Release 12.2(33)SRE
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2007 Cisco Systems, Inc. All rights reserved.
AToM Static Pseudowire Provisioning
First Published: February 19, 2007
Last Updated: February 19, 2007
Last Updated: February 19, 2007
The AToM Static Pseudowire Provisioning feature allows provisioning an Any Transport over
Multiprotocol (AToM) label switching static pseudowire without the use of a directed control
connection. In environments that do not or cannot use directed control protocols, this feature provides a
means for provisioning the pseudowire parameters statically at the Cisco IOS command-line interface
(CLI).
Multiprotocol (AToM) label switching static pseudowire without the use of a directed control
connection. In environments that do not or cannot use directed control protocols, this feature provides a
means for provisioning the pseudowire parameters statically at the Cisco IOS command-line interface
(CLI).
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
links to specific feature documentation in this module and to see a list of the releases in which each feature is
supported, use the
.
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS
software image support. To access Cisco Feature Navigator, go to
software image support. To access Cisco Feature Navigator, go to
. An
account on Cisco.com is not required.
Contents
•
•
•
•
•
•
•