Cisco Cisco IOS Software Release 12.2(33)SRE

To display Resource Reservation Protocol (RSVP)-related information, use the show ip rsvp interface 
command in user EXEC or privileged EXEC mode.

show ip rsvp interface [interface-type interface-number] [detail]

User EXEC
Privileged EXEC

Use the show ip rsvp interface command to display information about interfaces on which RSVP is 
enabled, including the current allocation budget and maximum available bandwidth. Enter the optional 
detail keyword for additional information, including bandwidth and signaling parameters and blockade 
state.

(Optional) Type of the interface.

(Optional) Number of the interface.

(Optional) Displays additional information about interfaces.

11.2

This command was introduced.

12.2(2)T

The optional detail keyword was added.

12.2(4)T

This command was implemented on the Cisco 7500 series and the ATM 
permanent virtual circuit (PVC) interface.

12.0(22)S

The command output was modified to display hello message information.

12.2(14)S

This command was integrated into Cisco IOS Release 12.2(14)S.

12.2(13)T

The following modifications were made to this command:

Rate-limiting and refresh-reduction information was added to the output 
display.

RSVP global settings display when no keywords or arguments are 
entered.

12.2(15)T

The following modifications were made to this command:

The effects of compression on admission control and the RSVP 
bandwidth limit counter were added to the display.

Cryptographic authentication parameters were added to the display.

12.2(18)SFX2

This command was integrated into Cisco IOS Release 12.2(18)SFX2.

12.2(28)SB

This command was integrated into Cisco IOS Release 12.2(28)SB.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA.

12.2(33)SRB

The command output was modified to display fast local repair (FLR) 
information.