Cisco Cisco IOS Software Release 12.2(33)SRE

To display Resource Reservation Protocol (RSVP) PATH-related sender information currently in the 
database, use the show ip rsvp sender command in user EXEC or privileged EXEC mode.

show ip rsvp sender [ip-address | hostname] [detail]

show ip rsvp sender [detail] [filter [destination ip-address | hostname] 

[dst-port port-number] [source ip-address | hostname] [src-port port-number]]

User EXEC
Privileged EXEC 

(Optional) Destination IP address.

(Optional) Hostname.

(Optional) Specifies additional sender information.

(Optional) Specifies a subset of the senders to display.

destination ip-address (Optional) Destination IP address of the sender.

(Optional) Hostname of the sender.

dst-port port-number

(Optional) Destination port number. The range is from 0 to 65535.

source ip-address

(Optional) Source IP address of the sender.

(Optional) Hostname of the sender.

src-port port-number

(Optional) Source port number. The range is from 0 to 65535.

11.2

This command was introduced.

12.0(22)S

The command output was modified to display Fast Reroute information, and 
support was introduced for the Cisco 10000 series Edge Services Router 
(ESR).

12.2(18)SXD1 

This command was integrated into Cisco IOS Release 12.2(18)SXD1.

12.4(4)T

The command output was modified to display application ID information.

12.2(33)SRA

This command was integrated into Cisco IOS Release 12.2(33)SRA. 

12.2(31)SB2

This command was integrated into Cisco IOS Release 12.2(31)SB2. 

12.2(33)SRB

The command output was modified to display fast local repair (FLR) 
information.