Cisco Cisco IOS Software Release 12.2(33)SRE

For each run, the following information appears:

The time that the run started relative to the start of the procedure

The time that RSVP suspended again

The number of notifications processed in this run

For each neighbor, the following information appears:

The delay of the first PATH message sent to this neighbor

The delay of the last PATH message sent to this neighbor

The following example displays information about the FLR rate:

Router# show ip rsvp signalling fast-local-repair

Fast Local Repair: enabled

   Max repair rate (paths/sec): 400

   Max processed   (paths/run): 1000

Table 15 

describes the significant fields shown in the display.

The following example displays information about FLR procedures:

Router# show ip rsvp signalling fast-local-repair statistics

Fast Local Repair: enabled

   Max repair rate (paths/sec): 1000

   Max processed   (paths/run): 1000

FLR Statistics:

  FLR   State    Start                          #PSB   Repair RIB Proc Last

  Proc.          Time                           Repair Rate   Time     PSB

  1     DONE     15:16:32 MET Wed Oct 25 2006   2496   1000   91(ms)   3111(ms)

Fast Local Repair

FLR state. Values are the following:

Enabled—FLR is configured.

Disabled—FLR is not configured.

Max repair rate (paths/sec)

Maximum repair rate, in paths per second.

Max processed (paths/run)

Maximum notification elements processed, in paths per run.