Cisco Cisco IOS Software Release 12.2(33)SRE

Suspend count

Number of times that RSVP has suspended during a specific 
procedure.

If this value is non-zero, details for each run are 
shown.

Run ID

Identifier (number) for each time that RSVP has run.

Number of ntf.

Number of notifications (PSBs) processed in a run.

Started (time from Start)

Time, in milliseconds (ms), that the run began relative to the 
start of the FLR procedure.

Duration

Length of time, in milliseconds (ms), for the run.

FLR Pacing Unit

Frequency, in milliseconds (msec), for RSVP message 
pacing; that is, how often a PATH message is sent. The value 
is rounded down.

Affected neighbors

Neighbors involved in the FLR procedure.

Nbr Address

IP address for each neighbor involved in a procedure.

Relative Delay Values

Times, in milliseconds (msec), when the PSB refreshes were 
sent. 

In the sample display, there is a 1-msec pacing unit; 
therefore, PSBs to 10.1.0.70 have been sent with 
delays of 1 msec from 500, 501, 502, 503, ... 2995. If 
a 5-msec pacing unit were used, the delays would be 
500, 505, 510,... 2990, 2995.

Configures the number of notifications that are processed before RSVP 
suspends.

Configures the repair rate that RSVP uses for an FLR procedure.

Configures the delay used to start an FLR procedure.

Controls the transmission rate for RSVP messages sent to a neighboring 
router during a specified amount of time.