Cisco Cisco IOS Software Release 12.2(14)S

The following is sample output from the show route-map command with the dynamic and detailed 
keywords entered:

Router# show route-map dynamic detailed

route-map AAA-01/20/04-22:03:10.799-1-AppSpec, permit, sequence 1, identifier 29675368 

Match clauses: 

ip address (access-lists): 

Extended IP access list PBR#3 

1 permit icmp 0.0.16.12 1.204.167.240 8.1.1.0 0.0.0.255 syn dscp af12 log-input fragments 

Extended IP access list PBR#4 

1 permit icmp 0.0.16.12 1.204.167.240 8.1.1.0 0.0.0.255 syn dscp af12 log-input fragments 

Set clauses: 

ip next-hop 172.16.1.14 

ip gateway 172.16.1.14 

Policy routing matches: 0 packets, 0 bytes

The following is sampe output from the show route-map command when a specified VRF is configured 
for VRF autoclassification:

Router# show route-map dynamic

route-map None-06/01/04-21:14:21.407-1-IP VRF, permit, sequence 0

identifier 1675771000

Match clauses:

Set clauses: vrf red

Policy routing matches: 0 packets, 0 bytes

Current active dynamic routemaps = 1

Redistributes routes from one routing domain into another routing domain.

Defines the conditions for redistributing routes from one routing protocol 
into another, or enables policy routing.