Cisco Cisco IOS Software Release 12.2(14)S

Page de 16
1
Cisco IOS Release 12.0(14)ST, 12.2(4)T, 12.2(14)S, and 12.0(22)S
BGP Conditional Route Injection
Feature History
This feature module describes the BGP Conditional Route Injection feature. It includes the following 
sections:
Feature Overview 
Routes that are advertised through the Border Gateway Protocol (BGP) are commonly aggregated to 
minimize the number of routes that are used and reduce the size of global routing tables. However, 
common route aggregation can obscure more specific routing information that is more accurate but not 
necessary to forward packets to their destinations. Routing accuracy is obscured by common route 
aggregation because a prefix that represents multiple addresses or hosts over a large topological area 
cannot be accurately reflected in a single route. Cisco IOS software provides several methods in which 
you can originate a prefix into BGP. The existing methods include redistribution and using the network 
or aggregate-address command. These methods assume the existence of more specific routing 
information (matching the route to be originated) in either the routing table or the BGP table.
Release
Modification
12.0(14)ST
This feature was introduced.
12.2(4)T
This feature was integrated into Cisco IOS Release 12.2(4)T.
12.2(14)S
This feature was integrated into Cisco IOS Release 12.2(14)S.
12.0(22)S
This feature was integrated into Cisco IOS Release 12.0(22)S.