Cisco Cisco IOS Software Release 12.2(33)SRE

© 2006, 2007 Cisco Systems, Inc. All rights reserved.

The Any Transport over MPLS: Tunnel Selection feature allows you to specify the path that Any 
Transport over MPLS (AToM) traffic uses. You can specify either a Multiprotocol Label Switching 
(MPLS) traffic engineering tunnel or a destination IP address and Domain Name System (DNS) name. 
If the specified path is unreachable, you can specify that the virtual circuits (VCs) should use the default 
path, which is the path that MPLS Label Distribution Protocol (LDP) uses for signaling. The option of 
having a backup LDP path is enabled by default; you must explicitly disable it. 

Your Cisco IOS software release may not support all of the features documented in this module. To reach 
links to specific feature documentation in this module and to see a list of the releases in which each feature is 
supported, use the 

.

Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS 
software image support. To access Cisco Feature Navigator, go to 

. An 

account on Cisco.com is not required.