Cisco Cisco IOS Software Release 12.2(33)SRE

This feature allows you to specify the storage location of local certificate for platforms that support 
storing certificates as separate files. All Cisco platforms support NVRAM, which is the default location, 
and flash local storage. Depending on your platform, you may have other supported local storage options 
including bootflash, slot, disk, USB flash, or USB token.

Configuration information is included in the “Storing PKI Credentials” chapter in the 

, Release 12.4T

at the following URL:

Command reference information is included in the 

, 

Release 12.2SR, at the following URL:

The following commands are new or modified for this feature:

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and 
figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and 
coincidental.

© 2006 Cisco Systems, Inc. All rights reserved.