Cisco Cisco IOS Software Release 12.2(35)SE
Americas Headquarters:
© 2007 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the
Cisco Catalyst Blade Switch 3030,
Cisco IOS Release 12.2(37)SE and Later
Cisco Catalyst Blade Switch 3030,
Cisco IOS Release 12.2(37)SE and Later
Revised: August 8, 2007
Cisco IOS Release 12.2(37)SE runs on the Cisco Catalyst Blade Switch 3030.
Unless otherwise noted, the term switch refers to a standalone switch.
These release notes include important information about Cisco IOS Release 12.2(37)SE and any
limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct for
your switch:
limitations, restrictions, and caveats that apply to them. Verify that these release notes are correct for
your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
For the complete list of Cisco Catalyst Blade Switch 3030 documentation and of Cisco EtherSwitch
service module documentation, see the
service module documentation, see the
.
You can download the switch software from this site (registered Cisco.com users with a login password):
Contents
This information is in the release notes:
•
•
•
•
•