Cisco Cisco IOS Software Release 12.2(35)SE

Cisco routinely removes old Cisco IOS versions from Cisco.com. See Product Bulletin 2863 for more 
information:

http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/prod_bulletin0900aecd80281c0e.html

You can copy the bin software image file on the flash memory to the appropriate TFTP directory on a 
host by using the copy flash: tftp: privileged EXEC command. 

Although you can copy any file on the flash memory to the TFTP server, it is time-consuming to copy 
all of the HTML files in the tar file. We recommend that you download the tar file from Cisco.com and 
archive it on an internal host in your network.

You can also configure the switch as a TFTP server to copy files from one switch to another without 
using an external TFTP server by using the tftp-server global configuration command. For more 
information about the tftp-server command, see the “Basic File Transfer Services Commands” section 
of the Cisco IOS Configuration Fundamentals Command Reference, Release 12.2, at this URL:

You can upgrade switch software by using the device manager or Network Assistant. For detailed 
instructions, click Help. 

When using the device manager to upgrade your switch, do not use or close your browser session after 
the upgrade process begins. Wait until after the upgrade process completes.

This procedure is for copying the combined tar file to the switch. You copy the file to the switch from a 
TFTP server and extract the files. You can download an image file and replace or keep the current image.

To download software, follow these steps:

Use 

 to identify the file that you want to download.

Download the software image file. If you have a SmartNet support contract, go to this URL, and log in 
to download the appropriate files:

To download the universal software image files for a Cisco Catalyst Blade Switch 3130 for Dell or a 
Cisco Catalyst Blade Switch 3032 for Dell, click Blade Switches > Cisco Catalyst Blade Switch 3000 
Series for Dell >. To obtain authorization and to download the cryptographic software files, click Cisco 
Catalyst Blade Switch 3000 Series for Dell Cryptographic Software.

Copy the image to the appropriate TFTP directory on the workstation, and make sure that the TFTP 
server is properly configured. 

For more information, see Appendix B in the software configuration guide for this release.

Log into the switch through the console port or a Telnet session.