Cisco Cisco IOS Software Release 12.2(27)SBC

Page de 32
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2004–2007 Cisco Systems, Inc. All rights reserved.
Pseudowire Emulation Edge-to-Edge MIBs for 
Ethernet, Frame Relay, and ATM Services
First Published: August 25, 2004
Last Updated: June 29, 2007
The Pseudowire Emulation Edge-to-Edge MIBs for Ethernet, Frame Relay, and ATM Services feature 
provides Simple Network Management Protocol (SNMP) support within an Any Transport over 
Multiprotocol Label Switching (AToM) infrastructure emulating Ethernet, Frame Relay, and ATM 
services over packet switched networks (PSNs). The Pseudowire Emulation Edge-to-Edge (PWE3) 
MIBs are the following:
CISCO-IETF-PW-MIB (PW-MIB) 
CISCO-IETF-PW-MPLS-MIB (PW-MPLS-MIB) 
CISCO-IETF-PW-ENET-MIB (PW-ENET-MIB) 
CISCO-IETF-PW-FR-MIB (PW-FR-MIB) 
CISCO-IETF-PW-ATM-MIB (PW-ATM-MIB)
Cisco IOS Release 12.2(28)SB introduces support for the CISCO-IETF-PW-ATM-MIB 
(PW-ATM-MIB), which provides network management information specific to an ATM over pseudowire 
connection in a Multiprotocol Label Switching (MPLS) AToM or an IP network.
Finding Feature Information in This Module
Your Cisco IOS software release may not support all of the features documented in this module. To reach 
links to specific feature documentation in this module and to see a list of the releases in which each feature is 
supported, use the 
.
Finding Support Information for Platforms and Cisco IOS and Catalyst OS Software Images 
Use Cisco Feature Navigator to find information about platform support and Cisco IOS and Catalyst OS 
software image support. To access Cisco Feature Navigator, go to 
. An 
account on Cisco.com is not required.