Cisco Cisco IOS Software Release 12.2(27)SBC
Corporate Headquarters
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2006 Cisco Systems, Inc. All rights reserved.
RBSCP (Rate Based Satellite Control Protocol)
The RBSCP (Rate Based Satellite Control Protocol) was designed for wireless or long-distance delay
links with high error rates, such as satellite links. Using tunnels, RBSCP can improve the performance
of certain IP protocols, such as TCP and IP Security (IPSec), over satellite links without breaking the
end-to-end model.
links with high error rates, such as satellite links. Using tunnels, RBSCP can improve the performance
of certain IP protocols, such as TCP and IP Security (IPSec), over satellite links without breaking the
end-to-end model.
Configuration Information
, Release 12.4,
at the following URLs:
The following sections provide information about this feature:
•
Rate-Based Satellite Control Protocol Tunnels
•
Determining the Tunnel Type
•
Configuring the RBSCP Tunnel
•
Verifying RBSCP Tunnel Configuration and Operation
Command Reference Information
Command reference information is included in the Cisco IOS Interface and Hardware Component
Command Reference,
Command Reference,
Release 12.2SB, at the following URL:
New or Modified Commands
The following commands are new or modified for this feature:
•
clear rbscp
•
debug tunnel rbscp
•
show rbscp
•
tunnel bandwidth
•
tunnel mode
•
tunnel rbscp ack-split
•
tunnel rbscp delay