Cisco Cisco IOS Software Release 12.2(27)SBC
1
VRF-Aware VPDN Tunnels
The VRF-Aware VPDN Tunnels feature provides support for virtual private dialup network (VPDN)
tunnels that terminate on a Virtual Private Network (VPN) routing and forwarding (VRF) instance. This
feature allowing you to use IP addresses from a VRF routing table for the endpoints of a VPDN tunnel,
rather than specifying IP addresses from the global routing table.
tunnels that terminate on a Virtual Private Network (VPN) routing and forwarding (VRF) instance. This
feature allowing you to use IP addresses from a VRF routing table for the endpoints of a VPDN tunnel,
rather than specifying IP addresses from the global routing table.
The VRF-Aware VPDN tunnels feature enhances the support of VPDN tunnels by allowing VPDN
tunnels to start outside a Multiprotocol Label Switching (MPLS) VPN and terminate within the MPLS
VPN. For example, this feature allows you to use a VRF address from a customer VRF as the destination
address.
tunnels to start outside a Multiprotocol Label Switching (MPLS) VPN and terminate within the MPLS
VPN. For example, this feature allows you to use a VRF address from a customer VRF as the destination
address.
Configuration Information
Configuration information is included in the “Configuring Additional VPDN Features” module of the
, Release 12.4T, at the following URL:
Command Reference
This section documents modified commands.
•