Cisco Cisco IOS Software Release 12.2(27)SBC
Cisco Express Forwarding: Command Changes
show adjacency
58
Multiple Cisco IOS Releases
show adjacency
To display information about the Cisco Express Forwarding adjacency table or the hardware Layer
3-switching adjacency table, use the show adjacency command in user EXEC or privileged EXEC
mode.
3-switching adjacency table, use the show adjacency command in user EXEC or privileged EXEC
mode.
show adjacency [summary | ip-address | interface-type interface-number | null number |
port-channel number | sysclock number | vlan number | ipv6-address | fcpa number | link {ipv4
| ipv6 | mpls} | connectionid number | detail | serial number]
| ipv6 | mpls} | connectionid number | detail | serial number]
Syntax Description
Defaults
This command has no default settings.
Command Modes
User EXEC
Privileged EXEC
Privileged EXEC
Command History
summary
(Optional) Displays a summary of Cisco Express Forwarding adjacency
information.
information.
ip-address
(Optional) An IP address or IPv6 address.
Note
On the Cisco 10000 series routers IPv6 is supported on
Cisco IOS Release 12.2(28)SB or later releases.
Cisco IOS Release 12.2(28)SB or later releases.
interface-type
interface-number
interface-number
(Optional) Interface type and number. Valid values for the interface-type
argument are atm, async, auto-template, ctunnel, dialer, esconphy,
fastethernet, filter, filtergroup, gigabitethernet, group-async,
longreachethernet, loopback, mfr, multilink, portgroup, pos, tunnel,
vif, virutal-template, voabypassin, voabypassout, voafilterin,
voafilterout, voain, and voaout.
argument are atm, async, auto-template, ctunnel, dialer, esconphy,
fastethernet, filter, filtergroup, gigabitethernet, group-async,
longreachethernet, loopback, mfr, multilink, portgroup, pos, tunnel,
vif, virutal-template, voabypassin, voabypassout, voafilterin,
voafilterout, voain, and voaout.
null number
(Optional) Specifies the null interface. The valid value is 0.
port-channel number
(Optional) Specifies the channel interface; valid values are 1 to 282.
sysclock number
(Optional) Telecom-bus clock controller; valid values are 1 to 6.
vlan number
(Optional) Specifies the VLAN; valid values are 1 to 4094.
ipv6-address
(Optional) Specifies the associated IPv6 address.
fcpa number
(Optional) The fiber channel; valid values are 1 to 6.
link {ipv4 | ipv6 | mpls} (Optional) Specifies the link type (IP, IPv6, or Multiprotocol Label
Switching (MPLS) traffic of the adjacency).
connectionid number
(Optional) Specifies the client connection identification number.
detail
(Optional) Displays the protocol detail and timer information.
serial number
(Optional) Specifies the serial interface number; valid values are 1 to 6.
Release
Modification
11.2GS
This command was introduced.
11.1CC
Multiple platform support was added.
12.0(7)XE
Support was added for the Cisco 7600 series routers.