Cisco Cisco IOS Software Release 12.2(25)S
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
CNS Agents
transport event
59
Cisco IOS Release 12.2(25)S
transport event
To specify that inventory events are sent out by the CNS inventory agent, use the transport event
command in CNS inventory configuration mode. To disable the transport of inventory events, use the no
form of this command.
command in CNS inventory configuration mode. To disable the transport of inventory events, use the no
form of this command.
transport event
no transport event
Syntax Description
This command has no arguments or keywords.
Defaults
Disabled
Command Modes
CNS inventory configuration
Command History
Usage Guidelines
Use this command to send out inventory requests with each CNS inventory agent message. When
configured, the routing device will respond to queries from the CNS event bus. Online insertion and
removal (OIR) events on the routing device will be reported to the CNS event bus.
configured, the routing device will respond to queries from the CNS event bus. Online insertion and
removal (OIR) events on the routing device will be reported to the CNS event bus.
Examples
The following example shows how to enable the CNS inventory agent and configure it to send out
inventory events:
inventory events:
Router(config)# cns inventory
Router(cns_inv)# transport event
Related Commands
Release
Modification
12.3(1)
This command was introduced.
12.2(25)S
This command was integrated into Cisco IOS Release 12.2(25)S.
Command
Description
cns inventory
Enables the CNS inventory agent and enters CNS inventory configuration
mode.
mode.