Cisco Cisco IOS Software Release 12.2(53)SE
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for Cisco Catalyst Switch Module
3110G, 3110X, and 3012 for IBM BladeCenter,
Cisco IOS Release 12.2(53)SE and Later
3110G, 3110X, and 3012 for IBM BladeCenter,
Cisco IOS Release 12.2(53)SE and Later
Revised March 24, 2010
Cisco IOS Release 12.2(53)SE and later runs only on Catalyst Switch Module 3110G, 3110X, and 3012.
These release notes include important information about Cisco IOS Release 12.2(53)SE and later and
any limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for
your switch module:
any limitations, restrictions, and caveats that apply to it. Verify that these release notes are correct for
your switch module:
•
If you are installing a new switch module, see the Cisco IOS release label on the rear panel of your
switch module.
switch module.
•
If your switch module is on, use the show version
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch module software from these sites (registered Cisco.com users with a login
password):
password):
http://www.cisco.com/cisco/web/download/index.html
For the complete list of Catalyst Switch Module 3110G, 3110X, and 3012 for IBM BladeCenter
documentation, see the
documentation, see the
.