Cisco Cisco IOS Software Release 12.2(58)SE
Americas Headquarters:
© 2011 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Release Notes for the Cisco IE 3000 Switch,
Cisco IOS Release 12.2(58)SE1 and Later
Cisco IOS Release 12.2(58)SE1 and Later
Revised December 22, 2011
Note
Cisco IOS Release 12.2(58)SE images for all platforms were removed from Cisco.com because of a
severe defect, CSCto62631. The solution for the defect is in Cisco IOS Release 12.2(58)SE1.
severe defect, CSCto62631. The solution for the defect is in Cisco IOS Release 12.2(58)SE1.
Cisco IOS Release 12.2(58)SE1 runs on all Cisco IE 3000 switches.
These release notes include important information about Cisco IOS Release 12.2(58)SE1, and any
limitations, restrictions, and caveats that apply to the releases. Verify that these release notes are correct
for your switch:
limitations, restrictions, and caveats that apply to the releases. Verify that these release notes are correct
for your switch:
•
If you are installing a new switch, see the Cisco IOS release label on the rear panel of your switch.
•
If your switch is on, use the show version privileged EXEC command. See the
•
If you are upgrading to a new release, see the software upgrade filename for the software version.
See the
See the
You can download the switch software from this site (registered Cisco.com users with a login password):
Contents
•
•
•
•
•
•