Cisco Cisco IOS XE 3.5E
17
Release Notes for Catalyst 3650 Series Switch, Cisco IOS XE Release 3.7.xE
OL-32621-01
Upgrading the Switch Software
The package files for the Cisco IOS XE software are stored on the system board flash device (flash:).
You can use the show version privileged EXEC command to see the software version that is running on
your switch.
your switch.
Note
Although the show version output always shows the software image running on the switch, the model
name shown at the end of this display is the factory configuration and does not change if you upgrade
the software license.
name shown at the end of this display is the factory configuration and does not change if you upgrade
the software license.
You can also use the dir filesystem: privileged EXEC command to see the directory names of other
software images that you might have stored in flash memory.
software images that you might have stored in flash memory.
Upgrading the Switch Software
For information about how to upgrade the switch software, see the System Management Configuration
Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches) at the following URL:
Guide, Cisco IOS XE Release 3E (Catalyst 3650 Switches) at the following URL:
Table 9
Software Images
Table 8
Cisco IOS XE to Cisco IOS Version Number Mapping
Cisco IOS XE Version
Cisco IOSd
Version
Version
Cisco Wireless
Control Module
Version
Control Module
Version
Access Point
Version
Version
03.07.00E
15.2(3)E
10.3.100.0
15.3(3)JNB
03.06.01E
15.2(2)E1
10.2.111.0
15.3(3)JN3
03.06.00E
15.2(2)E
10.2.102.0
15.3(3)JN
03.03.03SE
15.0(1)EZ3
10.1.130.0
15.2(4)JB5h
03.03.02SE
15.0(1)EZ2
10.1.121.0
15.2(4)JB5
03.03.01SE
15.0(1)EZ1
10.1.110.0
15.2(4)JB2
03.03.00SE
15.0(1)EZ
10.1.100.0
15.2(4)JN
Image
File Name
Universal
cat3k_caa-universalk9.SPA.03.07.00.E.152-3.E1.bin
Universal without DTLS
cat3k_caa-universalk9ldpe.SPA.03.07.00.E.152-3.E1.bi
n
n