Cisco Cisco IOS XE 3.5E Manuel Technique

Contents

Introduction
Prerequisites
Requirements
Components Used
Configure
Network Diagram
Configurations
Part 1 − Configuration on the 5508 Anchor WLC
Part 2 −Converged Access Mobility Configuration between the 5508/5760 Series WLC and the Catalyst
3850 Series Switch
Part 3: Configuration on the Foreign Catalyst 3850 Series Switch
Verify
Troubleshoot

Unified Access Wireless LAN Controllers Guest
Anchor with Converged Access Configuration
Example

Document ID: 117742

Contributed by Surendra BG, Cisco TAC Engineer.
Jun 18, 2014

Contents

Introduction

This documents describes how to configure the 5508/5760 Series Wireless LAN Controllers (WLCs) and the
Catalyst 3850 Series Switch for the wireless client Guest Anchor in the new mobility deployment setup where
the 5508 Series WLC acts as the Mobility Anchor and the Catalyst 3850 Series Switch acts as a Mobility
Foreign Controller for the clients. Additionally, the Catalyst 3850 Series Switch acts as a Mobility Agent to a
5760 Series WLC that acts as a Mobility Controller from where the Catalyst 3850 Series Switch acquires the
Access Point (AP) license.