Cisco Cisco IOS XR Software Release 4.2
0/25/*
PEM1
0
0
12000/6-AC-PEM= Intelligent AC PS
PEM2
52
9
12000/6-AC-PEM= Intelligent AC PS
To display the power used or total power or remaining power in chassis. Use the command show
power-mgr detail command in EXEC mode.
power-mgr detail command in EXEC mode.
RP/0/4/CPU0:router#
show power-mgr detail
Mon Sep 24 00:53:54.518 UTC
Power management summary
------------------------
Powershelf type: AC Power Supplies
Operating phase: RUNNING_PHASE
Feature state
------------------------
Powershelf type: AC Power Supplies
Operating phase: RUNNING_PHASE
Feature state
: Enabled
Operating mode : NON-REDUNDANT
Total supply power: 1900 W
Route processors: 60
W
Linecards: 240
W
Chassis components: 477
W
Total inuse power: 777
W
Remaining: 1123 W
PEM1 present, but unpowered
PEM2 present, supplying up to 1900 watts: uptime 0d01h39m
PEM2 present, supplying up to 1900 watts: uptime 0d01h39m
Slot
Cardtype
Watts
Status
----
--------
-----
------
1
12000-SIP-601=
240
powered
4
PRP=
60
powered
16
GSR6-CSC=
56
powered
17
GSR6-CSC=
56
powered
18
GSR6-SFC=
45
powered
19
GSR6-SFC=
45
powered
20
GSR6-SFC=
45
powered
24
GSR6-ALRM=
26
powered
25
GSR6-ALRM=
26
powered
28
GSR6-BLOWER=
178
powered
If you plan to insert a new card, locate the entry for the card to be inserted and note the power consumed
by it. If this power is less than the figure given in Worst Case Redundant Power Available (the figure
is displayed in the show environment power-supply table command output), the card can be safely
inserted. As long as the Worst Case Redundant Power Available is not zero, a PEM can be powered
down for replacement without impact.
by it. If this power is less than the figure given in Worst Case Redundant Power Available (the figure
is displayed in the show environment power-supply table command output), the card can be safely
inserted. As long as the Worst Case Redundant Power Available is not zero, a PEM can be powered
down for replacement without impact.
No alerts are issued if more cards are inserted than the PEMs can support. It is your
responsibility to determine your power budget for the chassis before making any changes
to it. Exceeding the power budget may result in the PEM being overloaded and cards
powering down due to insufficient power being provided.
responsibility to determine your power budget for the chassis before making any changes
to it. Exceeding the power budget may result in the PEM being overloaded and cards
powering down due to insufficient power being provided.
Note
• Per-interface Internet Control Message Protocol (ICMP) disable feature is not supported on the
Cisco XR 12000 Series Router.
• Online Diagnostics is not supported on the Cisco XR 12000 Series Router— If you execute the
diagnostic command, an error appears stating that there is no online diagnostics process running on the
router.
router.
• The rp mgmtethernet forwarding command is not supported on the Cisco XR 12000 Series Router.
Release Notes for Cisco XR 12000 Series Router for Cisco IOS XR Software Release 4.2.4
40
OL-28268-01
Release Notes for Cisco XR 12000 Series Router for Cisco IOS XR Software Release 4.2.4
Important Notes