Cisco Cisco ASA 5510 Adaptive Security Appliance Fascicule

Page de 1264
 
4-142
Cisco ASA Series 명령 참조 , S 명령
  
4      show bgp through show cpu 명령              
  show controller
         Num of Receive Rings  : 1
         Ring Size             : 128
         Max Frame Length      : 1550
         Out of Buffer         : 0
         Reset                 : 0
         Drop                  : 0
     Transmit Ring [0]:
         tx_pkts_in_queue      : 0
         tx_pkts               : 176
         tx_bytes              : 9664
     Receive Ring [0]:
         rx_pkts_in_queue      : 0
         rx_pkts               : 0
         rx_bytes              : 0
         rx_drops              : 0 
Internal-Data0/1:
   ASA IPS/VM Management Channel TunTap Interface , port id 9
     Major Configuration Parameters
         Device Name           : en_vtun
         Linux Tun/Tap Device  : /dev/net/tun/tap2
         Num of Transmit Rings : 1
         Num of Receive Rings  : 1
         Ring Size             : 128
         Max Frame Length      : 1550
         Out of Buffer         : 0
         Reset                 : 0
         Drop                  : 0
     Transmit Ring [0]:
         tx_pkts_in_queue      : 0
         tx_pkts               : 176
         tx_bytes              : 9664
     Receive Ring [0]:
         rx_pkts_in_queue      : 0
         rx_pkts               : 0
         rx_bytes              : 0
         rx_drops              : 0 
다음은 show controller slot 명령의 샘플 출력입니다.
Slot  Card Description                               PCI-e Bandwidth Cap.
----  ----------------                               ----------------------
3.    ASA 5580 2 port 10GE SR Fiber Interface Card   Bus: x4, Card: x8
4.    ASA 5580 4 port GE Copper Interface Card       Bus: x4, Card: x4
5.    ASA 5580 2 port 10GE SR Fiber Interface Card   Bus: x8, Card: x8
6.    ASA 5580 4 port GE Fiber Interface Card        Bus: x4, Card: x4
7.    empty                                          Bus: x8
8.    empty                                          Bus: x8 
다음은 show controller pci 명령의 샘플 출력입니다.
ciscoasa# show controller pci
PCI Evaluation Log:
  ---------------------------------------------------------------------------
    Empty
  PCI Bus:Device.Function (hex): 00:00.0 Vendor ID: 0x8086 Device ID: 0x3406
  ---------------------------------------------------------------------------