Cisco Cisco ASA for Nexus 1000V Series Switch Manuel Technique

ASA 8.X and Later: Add or Modify an Access List
through the ASDM GUI Configuration Example

Document ID: 112925

Contents

Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Configure
Network Diagram
Add a New Access List
Create a Standard Access List
Create a Global Access Rule
Edit an Existing Access List
Delete an Access List
Export the Access Rule
Export the Access List Information
Verify
Troubleshoot
Related Information

Introduction

This document explains how to use Cisco Adaptive Security Device Manager (ASDM) in order to work with
access control lists. This includes the creation of a new access list, how to edit an existing access list and other
functionalities with the access lists.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on these software and hardware versions:

Cisco Adaptive Security Appliance (ASA) with version 8.2.X

•

Cisco Adaptive Security Device Manager (ASDM) with version 6.3.X

•

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.