Cisco Cisco 2000 Series Wireless LAN Controller Guide De Dépannage
Aggressive Load Balancing on Wireless LAN
Controllers (WLCs) Release 6.0.182.0 and Earlier
Configuration Example
Controllers (WLCs) Release 6.0.182.0 and Earlier
Configuration Example
Document ID: 107457
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Aggressive Load−Balancing
Configure Aggressive Load−Balancing
Command Line Interface
Graphical User Interface
Example of Aggressive Load−Balancing
Important Notes on Aggressive Load−Balancing
Related Information
Prerequisites
Requirements
Components Used
Conventions
Aggressive Load−Balancing
Configure Aggressive Load−Balancing
Command Line Interface
Graphical User Interface
Example of Aggressive Load−Balancing
Important Notes on Aggressive Load−Balancing
Related Information
Introduction
This document explains the aggressive load−balancing feature on Wireless LAN Controllers (WLCs) in
versions 6.0.182.0 and earlier.
versions 6.0.182.0 and earlier.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
Knowledge of how to configure the Wireless LAN Controller and lightweight access point (LAP) for
basic operation.
basic operation.
•
Basic knowledge of Lightweight Access Point Protocol (LWAPP).
•
Components Used
The information in this document is based on these software and hardware versions:
Cisco 4400 Series Wireless LAN Controllers that run version 5.0.148.0
•
Cisco Aironet 1250 Series Lightweight Access Points
•
Cisco Aironet 802.11a/b/g (CB21AG) Wireless LAN Client adapters that run version 3.6
•
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.