Cisco Cisco 2106 Wireless LAN Controller
3
Release Notes for Cisco Wireless LAN Controllers and Mesh Access Points for Release 4.2.207.54M
OL-31336-01
System Requirements
•
Cisco Aironet 1000, 1100, 1130, 1140, 1200, 1240, 1250, and 1310 indoor access points.
Note
Release 4.2.207.54M does not support Cisco 1520 (1522, 1524) series mesh access points.
Cisco 1520 series mesh access points are supported in release 5.2 (and later) of the controller
mainline release.
Cisco 1520 series mesh access points are supported in release 5.2 (and later) of the controller
mainline release.
Note
Enterprise mesh is not supported in 4.2.207.54M.
Note
The 1140 and 1250 series access points have a hardware limitation where beacons can only
be output at intervals that are multiples of 17 milliseconds. When these APs are configured
for a 100-millisecond beacon interval, they transmit beacons every 102 milliseconds.
Similarly, when the beacon interval is configured for 20 millieconds, these APs transmit
beacons every 17 milliseconds.
be output at intervals that are multiples of 17 milliseconds. When these APs are configured
for a 100-millisecond beacon interval, they transmit beacons every 102 milliseconds.
Similarly, when the beacon interval is configured for 20 millieconds, these APs transmit
beacons every 17 milliseconds.
Note
Refer to the Cisco Aironet 1500 Series Outdoor Mesh Access Point Hardware Installation Guide and
Getting Started Guide for details on the physical installation and initial configuration of the mesh access
points at:
Getting Started Guide for details on the physical installation and initial configuration of the mesh access
points at:
Note
Refer to “Monitoring Wireless Devices” (Chapter 6) in the Cisco Wireless Control System Configuration
Guide, Release 6.0 for details on monitoring the mesh network (access points, links, statistics, alarms)
at:
Guide, Release 6.0 for details on monitoring the mesh network (access points, links, statistics, alarms)
at:
System Requirements
Caution
You can downgrade from 4.2.207.54M to release 4.1.192.35M. You cannot downgrade to any other mesh
release (4.1.190.5, 4.1.191.24M, or 4.1.192.22M).
release (4.1.190.5, 4.1.191.24M, or 4.1.192.22M).
Caution
A downgrade to any previous release resets the controller to the factory default configuration.
Software Images
lists the names of the images associated with this release.