Cisco Cisco 2000 Series Wireless LAN Controller
29
Release Notes for Cisco Wireless LAN Controllers and Cisco Aironet Lightweight Access Points for Releases 3.2.78.4 and 3.2.78.0
OL-31336-01
Caveats
•
CSCsb84437—The Cisco 4400 Series Wireless LAN Controller VPN Termination Module can now
support multiple IPSec sessions.
support multiple IPSec sessions.
•
CSCsb84451—Users are now able to configure the Cisco 4400 Series Wireless LAN Controller
management IP address using the configuration wizard.
management IP address using the configuration wizard.
•
CSCsb85034—When users enable WME or WMM on wireless LAN controllers, the TXOP values
are now transmitted in the correct format.
are now transmitted in the correct format.
•
CSCsb85116—The bsnTemperatureAlarmHighLimit & bsnTemperatureAlarmLowLimit functions
now work correctly.
now work correctly.
•
CSCsb85978—Cisco lightweight access point radios can no longer be activated when set to
disabled.
disabled.
•
CSCsb86060—Added a fix for the top WLAN link on the Monitor Summary page.
•
CSCsb87107—Cisco lightweight access points no longer crash because they receive incorrect
information in the LWAPP header.
information in the LWAPP header.
•
CSCsb87766—Show AP summary now reports the correct ports for associated Cisco lightweight
access points.
access points.
•
CSCsb88572—Editing a WLAN using the web interface no longer disables its auto anchor status.
•
CSCsb89184—ARP responses from multiple AP managers to a Cisco lightweight access point are
no longer sent out via the wrong ports.
no longer sent out via the wrong ports.
•
CSCsb89779—Overrides are now applied to the export anchor.
•
CSCsb90244—The web interface MAC filtering screen is now more usable.
•
CSCsb90307—The NEC logo is now displayed on web wizard screens.
•
CSCsb9084—Added new -P access points, which use country code JP2. The system fully supports
both the UNII 1 and UNII 2 changes in the new frequency plan as well as the normal 2.4 GHz
channels.
both the UNII 1 and UNII 2 changes in the new frequency plan as well as the normal 2.4 GHz
channels.
•
CSCsb91061—IPSec clients can now pass traffic when connected with a Cisco 4400 Series Wireless
LAN Controller equipped with a VPN Termination Module.
LAN Controller equipped with a VPN Termination Module.
•
CSCsb92188—In Cisco Aironet 1500 series lightweight outdoor access points, the interaction
between auto scan and BMK is now working correctly.
between auto scan and BMK is now working correctly.
•
CSCsb92303—In the web interface, the session timeout (seconds): 0 is a correct value.
•
CSCsb92724—When the number of clients is greater than the number of key cache entries, and the
clients connect using WPA and TKIP, packets are no longer dropped.
clients connect using WPA and TKIP, packets are no longer dropped.
•
CSCsb93202—Cisco lightweight access points no longer crash with spam tasks named in the AP
log.
log.
•
CSCsb93624—Made the error message that appears when the key length is misconfigured more
meaningful.
meaningful.
•
CSCsb93817—The wireless LAN controllers no longer crash without a crash file output.
•
CSCsb94179—In WiSMs, corrected the Cisco lightweight access point certificate operation.
•
CSCsb95006—When connected to Cisco 4100 Series Wireless LAN Controllers, REAP Cisco
Aironet 1030 remote edge lightweight access points no longer spontaneously reboot.
Aironet 1030 remote edge lightweight access points no longer spontaneously reboot.
•
CSCsb95888—When the IP address of a Cisco lightweight access point changes (from DHCP, for
instance), clients now receive an updated IP address when the lease times out and it completes a
DHCP discover.
instance), clients now receive an updated IP address when the lease times out and it completes a
DHCP discover.