Cisco Cisco 3365 Mobility Services Engine
29
Release Notes for Cisco Mobility Services Engine, Release 8.0.110.0
OL-32458-01
Operational Notes for Mobility Services Engine
•
You must delete the following directories if you want to reinstall again:
–
/opt/mse
–
/opt/data
–
/opt/oracle
–
/opt/ORCLfmap
–
/opt/installers/*
•
Scp
the db.tar file to /opt/installers directory and untar it at that location.
•
Run the MSE installer.
Reboot MSE After Fresh Installation or Upgrade
After a new installation or upgrade of the MSE software, you must reboot the MSE using the “reboot”
command.
command.
Automatic Installation Script for Initial Setup
An automatic setup wizard is available to help you initially set up the Mobility Services Engine.
An example of the complete automatic setup script is provided in the Cisco Mobility Services Engine
Getting Started Guide.
Getting Started Guide.
You can find these documents at the following URL:
Controller and Associated Mobility Services Engine Must be Mapped to the Same NTP and Prime
Infrastructure Server
Infrastructure Server
Communication between the Mobility Services Engine, the Prime Infrastructure, and the controller are
in Coordinated Universal Time (UTC). Configuring the Network Time Protocol (NTP) on each system
provides devices with the UTC time. An NTP server is required to automatically synchronize time
between the controller, Prime Infrastructure, and the Mobility Services Engine.
in Coordinated Universal Time (UTC). Configuring the Network Time Protocol (NTP) on each system
provides devices with the UTC time. An NTP server is required to automatically synchronize time
between the controller, Prime Infrastructure, and the Mobility Services Engine.
The Mobility Services Engine and its associated controllers must be mapped to the same NTP server and
the same Prime Infrastructure server.
the same Prime Infrastructure server.
Local time zones can be configured on a Mobility Services Engine to assist network operations center
personnel in locating events within logs.
personnel in locating events within logs.
Note
You can configure NTP server settings while running the automatic installation script. See the Cisco
Mobility Services Engine Getting Started Guide Started Guide for details on the automatic installation
script at the following URL:
Mobility Services Engine Getting Started Guide Started Guide for details on the automatic installation
script at the following URL:
Mandatory Default Root Password Change
You must change the default root password of the Mobility Services Engine while running the automatic
installation script to ensure optimum network security.
installation script to ensure optimum network security.
You can also change the password using the Linux passwd command.