Cisco Cisco 5760 Wireless LAN Controller Références techniques
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Usage Guidelines
CAC commands require that the WLAN you are planning to modify is configured for the Wi-Fi Multimedia
(WMM) protocol.
(WMM) protocol.
Before you can configure CAC parameters on a network, you must complete the following prerequisites:
• Disable all WLANs with WMM enabled by entering the wlan wlan_name shutdown command.
• Disable the radio network you want to configure by entering the ap dot11 {24ghz | 5ghz} shutdown
command.
• Save the new configuration.
• Enable voice or video CAC for the network you want to configure by entering the ap dot11 {24ghz |
5ghz} cac voice acm or ap dot11 {24ghz | 5ghz} cac video acm commands.
Examples
This example shows how to configure the maximum retry percent for multicast-direct media streams as 90
on a 802.11a network:
on a 802.11a network:
Controller(config)#
ap dot11 5ghz cac media-stream multicast max-retry-percent 90
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
618
OL-29471-01
ap dot11 cac media-stream