Cisco Cisco 5760 Wireless LAN Controller Guide De Montage
23
Cisco 5700 Series Wireless Controller Installation Guide
OL-28544-02
Unpacking and Installing the Controller
Step 5
Install the ground lug:
a.
Remove the first hex nut from the bracket and place the ground lug over the screw threads.
b.
Place the hex nut back on the screw threads and tighten.
Step 6
Reinstall the ground bracket onto the controller.
Figure 8
Ground Bracket
Step 7
Prepare the other end of the grounding cable and connect it to an appropriate grounding point in your
site to ensure adequate earth ground.
site to ensure adequate earth ground.
Preventing ESD Damage
Electrostatic discharge (ESD) damage occurs when electronic cards or components are improperly
handled and can result in complete or intermittent failures.
handled and can result in complete or intermittent failures.
Always use an ESD-preventive wrist or ankle strap and ensure that it makes good skin contact. Connect
the strap to any unpainted surface on the chassis.
the strap to any unpainted surface on the chassis.
Caution
Periodically check the resistance value of the antistatic strap. The measurement should be between 1 and
10 megohms (Mohms).
10 megohms (Mohms).
Connecting the Controller’s Console Port
Before you can configure the controller for basic operations, you need to connect it to a PC that uses a
VT-100 terminal emulator (such as HyperTerminal, ProComm, Minicom, or Tip).
VT-100 terminal emulator (such as HyperTerminal, ProComm, Minicom, or Tip).