Cisco Cisco Email Security Appliance C160 Références techniques

Enter the name or number of the ethernet interface you wish to edit.

[]> 2

Please enter a non-default (1500) MTU value for the Data 2 interface.

[]> 1200

Ethernet interfaces:

1. Data 1 default mtu 1500

2. Data 2 mtu 1200

3. Management default mtu 1500

4. VLAN   12 default mtu 1500

Choose the operation you want to perform:

- EDIT - Edit an ethernet interface.

[]>

Configure the interface. You can create, edit, or delete interfaces. You can enable FTP, change an IP 
address, and configure Ethernet IP addresses. 

Commit: This command requires a ‘commit’.

Cluster Management: This command is restricted to machine mode.

Batch Command: This command supports a batch format.

The batch format of the 

interfaceconfig

 command can be used to perform all the fuctions of the 

traditional CLI command.

Creating a new interface

interfaceconfig new <name>

                   <ethernet interface>

                   <hostname>

--ip=IPv4 Address/Netmask

--ip6=IPv6 Address/Prefix Lenght

                   [--ftp[=<port>]] 

                   [--telnet[=<port>]]

                   [--ssh[=<port>]]