Cisco Cisco Email Security Appliance C160 Références techniques

Current Settings:

  Maximum File Size:  200 MB

  Limit:              None (Run Indefinitely)

  Interface(s):       ALL

  Filter:             (tcp port 25)

Choose the operation you want to perform:

- START - Start packet capture.

- SETUP - Change packet capture settings.

[]>

The 

ping

 command allows you to test connectivity to a network host from the appliance. 

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to machine mode. It is further restricted to the login 
host (i.e., the specific machine you are logged onto). This command requires access to the local file 
system.

Batch Command: This command does not support a batch format.

mail3.example.com> ping

Which interface do you want to send the pings from?

1. Auto

2. Management (192.168.42.42/24: mail3.example.com)

3. PrivateNet (192.168.1.1/24: mail3.example.com)

4. PublicNet (192.168.2.1/24: mail3.example.com)

[1]> 1

Please enter the host you wish to ping.

[]> anotherhost.example.com

Press Ctrl-C to stop.

PING anotherhost.example.com (x.x.x.x): 56 data bytes

64 bytes from 10.19.0.31: icmp_seq=0 ttl=64 time=1.421 ms

64 bytes from 10.19.0.31: icmp_seq=1 ttl=64 time=0.126 ms

64 bytes from 10.19.0.31: icmp_seq=2 ttl=64 time=0.118 ms

64 bytes from 10.19.0.31: icmp_seq=3 ttl=64 time=0.115 ms

64 bytes from 10.19.0.31: icmp_seq=4 ttl=64 time=0.139 ms

64 bytes from 10.19.0.31: icmp_seq=5 ttl=64 time=0.125 ms

64 bytes from 10.19.0.31: icmp_seq=6 ttl=64 time=0.124 ms

64 bytes from 10.19.0.31: icmp_seq=7 ttl=64 time=0.122 ms

64 bytes from 10.19.0.31: icmp_seq=8 ttl=64 time=0.126 ms

64 bytes from 10.19.0.31: icmp_seq=9 ttl=64 time=0.133 ms

64 bytes from 10.19.0.31: icmp_seq=10 ttl=64 time=0.115 ms

^C