Cisco Cisco Email Security Appliance C160 Références techniques

Use the 

traceroute 

command to test connectivity to a network host using IPV4 from the appliance and 

debug routing issues with network hops.

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to machine mode. It is further restricted to the login 
host (i.e., the specific machine you are logged onto). This command requires access to the local file 
system.

Batch Command: This command does not support a batch format.

mail3.example.com> traceroute

Which interface do you want to trace from?

1. Auto

2. Management (192.168.42.42/24: mail3.example.com)

3. PrivateNet (192.168.1.1/24: mail3.example.com)

4. PublicNet (192.168.2.1/24: mail3.example.com)

[1]> 1

Please enter the host to which you want to trace the route.

[]> 10.1.1.1

Press Ctrl-C to stop.

traceroute to 10.1.1.1 (10.1.1.1), 64 hops max, 44 byte packets

 1  gateway (192.168.0.1)  0.202 ms  0.173 ms  0.161 ms

 2  hostname (10.1.1.1)  0.298 ms  0.302 ms  0.291 ms

mail3.example.com>

Use the 

traceroute6 

command to test connectivity to a network host using IPV6 from the appliance 

and debug routing issues with network hops.

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to machine mode. It is further restricted to the login 
host (i.e., the specific machine you are logged onto). This command requires access to the local file 
system.

Batch Command: This command does not support a batch format.