Cisco Cisco Email Security Appliance C160 Références techniques

Ensure that the dedicated Remote Power Management port is cabled directly to a secure network. For 
information, see the Hardware Installation Guide. Verify that any required ports through the firewall are 
open and that the appliance can be accessed remotely. 

Commit: This command requires a ‘commit’.

Cluster Management: This command is restricted to machine mode.

Batch Command: This command does not support a batch format. 

esa01> remotepower

Current remote power settings:

Access to IPMI remote power commands currently disabled.

Choose the operation you want to perform:

- SETUP - Configure IPMI for chassis remote power access.

[]> setup

Do you want to enable remote access to chassis power commands?

[N]> y

Please enter the IP address (IPv4 only) for the chassis.

[]> 192.0.2.254

Please enter the netmask.

[]> 255.255.255.0

Please enter the gateway address.

[]> 192.0.2.1

Please enter the user name that will be used to log in to the chassis.

[]> user1

Please enter the password.

> 

Please enter the password again to confirm.

> 

Current remote power settings:

Access to IPMI remote power commands enabled.

IP Address: 192.0.2.254

Netmask: 255.255.255.0

Gateway: 192.0.2.1

User name: user1

Resume receiving and deliveries