Cisco Cisco Email Security Appliance C160 Références techniques
54
Cisco AsyncOS 8.5.5 CLI Reference Guide
Chapter 3 The Commands: Reference Examples
Configuration File Management
Note
The
resetconfig
command only works when the appliance is in the offline state. When the
resetconfig
command completes, the appliance is automatically returned to the online state, even before you run the
systemsetup
command again. If mail delivery was suspended before you issued the
resetconfig
command, the mail will attempt to be delivered again when the
resetconfig
command completes.
Warning
The
resetconfig
command will return all network settings to factory defaults, potentially
disconnecting you from the CLI, disabling services that you used to connect to the appliance (FTP,
Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the
Telnet, SSH, HTTP, HTTPS), and even removing additional user accounts you created with the
userconfig
command. Do not use this command if you are not able to reconnect to the CLI using the
Serial interface or the default settings on the Management port through the default Admin user
account.
account.
Usage
Commit: This command does not require a ‘commit’.
Cluster Management: This command is restricted to machine mode. It is further restricted to the login
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
host (i.e., the specific machine you are logged onto). This command requires access to the local file
system.
Batch Command: This command does not support a batch format.