Cisco Cisco Email Security Appliance C160 Références techniques

You must use Control-C to end the 

ping

 command.

The 

routeconfig

 command allows you to create, edit, and delete static routes for 

TCP/IP traffic. By default, traffic is routed through the default gateway set with 
the 

setgateway

 command. However, IronPort AsyncOS allows specific routing 

based on destination.

Routes consist of a nickname (for future reference), a destination, and a gateway. 
A gateway (the next hop) is an IP address such as 

10.1.1.2

. The destination can 

be one of two things:

64 bytes from 10.19.0.31: icmp_seq=5 ttl=64 time=0.125 ms

64 bytes from 10.19.0.31: icmp_seq=6 ttl=64 time=0.124 ms

64 bytes from 10.19.0.31: icmp_seq=7 ttl=64 time=0.122 ms

64 bytes from 10.19.0.31: icmp_seq=8 ttl=64 time=0.126 ms

64 bytes from 10.19.0.31: icmp_seq=9 ttl=64 time=0.133 ms

64 bytes from 10.19.0.31: icmp_seq=10 ttl=64 time=0.115 ms

^C

--- anotherhost.example.com ping statistics ---

11 packets transmitted, 11 packets received, 0% packet loss

round-trip min/avg/max/stddev = 0.115/0.242/1.421/0.373 ms