Cisco Cisco Email Security Appliance C160 Guide De Montage
8
7
Temporarily Change Your IP
Address
To connect to the Cisco C170 appliance, you must temporarily
change the IP address of your computer.
change the IP address of your computer.
Note
Make a note of your current IP configuration settings
because you will need to revert to these settings after
you finish the configuration.
because you will need to revert to these settings after
you finish the configuration.
For Windows
Step 1
Go to the Start menu and choose Control Panel.
Step 2
Double-click Network and Sharing Center.
Step 3
Click Local Area Connection and then click Properties.
Step 4
Select Internet Protocol (TCP/IP) and then click
Properties.
Properties.
Step 5
Select Use the Following IP Address.
Step 6
Enter the following changes:
•
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.42.1
Step 7
Click OK and Close to exit the dialog box.
C170_QSG.fm Page 8 Wednesday, March 13, 2013 9:31 PM