Cisco Cisco Email Security Appliance C160 Mode D'Emploi

For email delivery and Virtual Gateways, each IP interface acts as one Virtual Gateway address with a 
specific IP address and hostname. You can also “join” interfaces into distinct groups (via the CLI), and 
the system will cycle through these groups when delivering email. 

Joining or grouping Virtual Gateways is useful for load-balancing large email campaigns across several 
interfaces. You can also create VLANs, and configure them just as you would any other interface (via 
the CLI). For more information, see 

Use the Network > IP Interfaces page or the 

interfaceconfig

 command to enable FTP access for the 

interface. 

WARNING: By disabling services via the 

interfaceconfig

 command, you have the potential to 

disconnect yourself from the CLI, depending on how you are connected to the appliance. Do not disable 

services with this command if you are not able to reconnect to the appliance using another protocol, the 

Serial interface, or the default settings on the Management port.

In this example, the Management interface is edited to enable FTP access on port 21 (the default 
port): 

Remember to 

commit

 your changes before moving on to the next step. 

Access the interface via FTP. Ensure you are using the correct IP address for the interface. For example:

$ ftp 192.168.42.42