Cisco Cisco Email Security Appliance X1070 Mode D'Emploi

4. Join an existing cluster over CCS.

[1]> 3

While joining a cluster, you will need to validate the SSH host key 

of the remote machine to which you are joining.  To get the public 

host key

fingerprint of the remote host, connect to the cluster and run: 

logconfig -> hostkeyconfig -> fingerprint.

WARNING: All non-network settings will be lost. System will inherit 

the values set at the group or cluster mode for the non-network 

settings.  Ensure that the cluster settings are compatible with your 

network settings (e.g. dnsconfig settings)

Do you want to enable the Cluster Communication Service on 

losangeles.example.com? [N]> n

Enter the IP address of a machine in the cluster.

[]> IP address is entered

Enter the remote port to connect to. The must be the normal admin ssh

port, not the CCS port.

[22]> 22

Enter the admin password for the cluster.