Cisco Cisco Email Security Appliance C160 Mode D'Emploi

This section describes the features used to configure the network operation of the appliance. These 
features give you direct access to the hostname, DNS, and routing settings that you configured via the 
System Setup Wizard (or the 

systemsetup

 command) in 

.

The following features are described:

sethostname

DNS Configuration (GUI and via the 

dnsconfig

 command)

Routing Configuration (GUI and via the 

routeconfig

 and 

setgateway

 commands

)

dnsflush

Passphrase

Network Access

Login Banner

The hostname is used to identify the system. You must enter a fully-qualified hostname. To change the 
hostname:

On the web interface, click Network> IP Interfaces, click the Management and in the 
Hostname, change the hostname.

On the CLI, use the s

ethostname

 command. 

The new hostname does not take effect until you commit changes.

Error connecting to cluster machine $name - $error - 
$why$error:=Invalid host key

’name’ - The hostname 
and/or serial number of the 
machine.

’why’ - Detailed text about 
the error.

Critical. Sent when the machine was unable to obtain 
a valid IP address for another machine in the cluster 
and was unable to obtain a valid SSH host key.

Error connecting to cluster machine $name - $error - 
$why$error:=Operation timed out

’name’ - The hostname 
and/or serial number of the 
machine.

’why’ - Detailed text about 
the error.

Warning. Sent when the machine was unable to 
obtain a valid IP address for another machine in the 
cluster and the specified operation timed out.

Overwriting $sections on machine $name

’name’ - The hostname 
and/or serial number of the 
machine.

’sections’ - List of cluster 
sections being sent.

Critical. Sent when configuration data has gotten out 
of sync and has been sent to a remote host.