Cisco Cisco TelePresence MX700 Fascicule
Manual registration of the endpoint
Certification authority proxy function information
Only applicable when:
1. Registering an endpoint for the first time; and the endpoint is
configured for secure (encrypted) communication.
2. Registering an endpoint after it has been factory reset;
and the endpoint is configured for secure (encrypted)
communication.
Navigate to the Certification Authority Proxy Function (CAPF)
Information section:
Certificate Operation: If using a secure profile, set to
Install/Upgrade. Only required the first time the endpoint is
registering. After the certificate has been downloaded to
the endpoint, this setting will automatically resume to No
pending Operation.
Authentication Mode: Choose the appropriate value from
Authentication Mode: Choose the appropriate value from
the drop down list.
By Null String: The Certificate Authority Proxy
Function (CAPF) process will start automatically.
This is the default value.
By Authentication String: The CAPF process will
By Authentication String: The CAPF process will
commence when the correct authentication code is
received from the endpoint.
By Existing Certificate (precedence to LSC/MIC): This
By Existing Certificate (precedence to LSC/MIC): This
option can only be used when a Locally Significant
Certificate (LSC) is already stored on the endpoint, i.e.
it cannot be used the first time the CAPF process runs.
Key-size: Choose the appropriate value from the drop
down list. The recommended key size is 1024.
Operation Completes By: Make sure the date and time
Operation Completes By: Make sure the date and time
are set to a future date and time. If set to the past the
installation/upgrade will not be performed.
When done click Save.
Navigate to: Device > Phone > Phone Configuration (continued from the previous page).
Navigate to the Certification Authority Proxy Function (CAPF) Information section.
Cisco TelePresence Endpoints and Cisco Unified Communications Manager
Quick Reference Guide
D14996.08 Administering TC7.0 Endpoints on CUCM 9.1.2, AUGUST 2014.
www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
15
Mandatory Optional
Contents
Introduction
CUCM configuration
Endpoint configuration
About passwords
Appendices
CUCM configuration