Cisco Cisco Aironet 1200 Access Point
20
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(7)JA4
OL-11512-01
Caveats
•
CSCsb06824—Open authentication is no longer added to an EAP SSID when the configuration is
loaded.
loaded.
•
CSCei07867—RM22A radio output power for different channels has been documented in the
appropriate hardware installation guides.
appropriate hardware installation guides.
•
CSCsa73846 (duplicate of CSCed16920)—350 series access point no longer shows high CPU and
TTY background tracebacks.
TTY background tracebacks.
•
CSCsa78495—LRS configured 1200 series access point now updates unknown username count.
•
CSCsa88841—DFS-IAPP constant has been changed to 0x34.
•
CSCsb09778 (duplicate of CSCsb06218)—1130 and 1200 access point boot loaders now boot IOS
when environment variables are deleted from flash.
when environment variables are deleted from flash.
•
CSCsb27662—Reports greater than 7900 bytes are no longer dropped by WLSE at RM AGG.
•
CSCsb06236—CCKM repeater no longer hangs during access point radio scan.
•
CSCsa90752—Trunking no longer fails on an 1100 series access point when in workgroup bridge
mode.
mode.
•
CSCeh97288 (duplicate of CSCsa79281)—Spectralink phones no longer reboot after upgrading to
Cisco IOS Release 12.3(4)JA
Cisco IOS Release 12.3(4)JA
•
CSCsb11227—1130 series access points operating as a WDS no longer run out of memory.
•
CSCsb14224—Reverse ARP functions on all VLANs
•
CSCeb52431—The 1100 series access point no longer sends hundreds of additional authentication
requests to a TACACS+ server after successful authentication.
requests to a TACACS+ server after successful authentication.
•
CSCef95410—WLCCP packets received from an access point no longer causes the radio interface
output drop counter to increment.
output drop counter to increment.
•
CSCsa67267—The mbssid command no longer fails on the CLI and the GUI.
•
CSCef11167—The access point now returns an accurate value when you poll
cDot11ActiveWirelessClients through SNMP.
cDot11ActiveWirelessClients through SNMP.
•
CSCeh38024—Access point WPAv2 migration mode now supports Cisco Aironet CB20A client
radios running firmware version 2.0.0.184 configured for optional WPAv2.
radios running firmware version 2.0.0.184 configured for optional WPAv2.
•
CSCsa45650—The 802.11b radio interface in 1200 series access points no longer reports its MAC
address as 000000000000 on both the GUI and through SNMP.
address as 000000000000 on both the GUI and through SNMP.
•
CSCsa68532—The results in the Strength %Out field and the Strength dBm field are no longer
reversed when you run a link test from an access point.
reversed when you run a link test from an access point.
•
CSCsa74148—Existing SSIDs are no longer invalid when you configure VLANs for the first time.
•
CSCsa74153—WPAv2 accounting start/stop records no longer appear in the ACS 3.3 RADIUS
accounting log with the client card MAC address as the username instead of the real username.
accounting log with the client card MAC address as the username instead of the real username.
•
CSCsa75865—The radio interface no longer fails and reloads firmware when multiple bssids are
enabled and the beacon period is configured for the minimum setting, 20 kilomicroseconds.
enabled and the beacon period is configured for the minimum setting, 20 kilomicroseconds.
•
CSCsa76923—The access point no longer sends out deauthentication frames with zero MAC
addresses in the source and BSSID fields during a WLSE controlled scan.
addresses in the source and BSSID fields during a WLSE controlled scan.
•
CSCsa77487—After an access point radio scan controlled by a WLSE running software release
2.11, the transmit power is no longer set to -1 dBm on the RM22A 802.11a radio module in 1200
series access points and the 802.11a radio in 1130AG access points.
2.11, the transmit power is no longer set to -1 dBm on the RM22A 802.11a radio module in 1200
series access points and the 802.11a radio in 1130AG access points.
•
CSCed75294—SCHED-3-STUCKMTMR tracebacks no longer appear in Dot11 aaa process.
•
CSCeg87732—show snmp mib ifmib if index command no longer returns different ifindex values.