Cisco Cisco Aironet 1810w Access Point Guide De Montage
33
Operating status
Blinking Amber
Software upgrade is in progress.
Cycling through Green,
Red and Amber
Red and Amber
Discovery/join process is in progress.
Rapidly cycling
through Red, Green,
Amber and Off
through Red, Green,
Amber and Off
Access point location command has been
invoked.
invoked.
Blinking Red
Ethernet link is not operational.
Boot loader warnings
Blinking Amber
Configuration recovery is in progress (Mode
button pushed for 2 to 3 seconds).
button pushed for 2 to 3 seconds).
Red
Ethernet failure.
Image recovery has been initiated (Mode button
pushed for 20 to 30 seconds).
pushed for 20 to 30 seconds).
Blinking Green
Image recovery is in progress (Mode button
released after being kept pressed for 20 to 30
seconds).
released after being kept pressed for 20 to 30
seconds).
Boot loader errors
Red
DRAM memory test failure.
Blinking Red and
Amber
Amber
Flash file system failure.
Blinking Red and off
Environment variable failure.
Bad MAC address.
Ethernet failure during image recovery.
Boot environment failure.
No Cisco image file.
Boot failure.
Cisco IOS errors
Red
Software failure.
Try disconnecting and reconnecting power to the
AP.
AP.
Cycling through Red,
Green, Amber and off.
Green, Amber and off.
General warning. Insufficient inline power.
Table 2
LED Status Indications (continued)
Message Type
LED State
Possible Messages and Meanings