Cisco Cisco Aironet 3500e Access Point Fiche De Données
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Wireless CleanAir Deployment Guide
Smart Business Architecture
Step 7:
On a Supported Windows platform with Cisco Spectrum Expert
Connect (4.0 or greater) installed, launch Spectrum Expert.
Figure 46.
Launch Spectrum Expert
Step 8:
Select the Radial Button Remote Sensor:
Step 8A:
Enter the IP address of the CleanAir access point
Step 8B:
Enter the Network Spectrum Interface Key of the CleanAir
access point.
Step 8C:
Step 8C:
Select either 2.4 GHz by selecting the b/g/n radial button or
the 5 GHz by selecting the a/n radial button.
Step 8D:
Step 8D:
Click OK.
Figure 47.
Enter Remote CleanAir Details
The connected Windows machine now connects to the remote CleanAir access
point on UDP port 37540 if you selected b/g or on UDP port 37550 if you selected
a/n during preceding setup steps. If connection problems occur, verify that you
can ping the CleanAir access point and that there are no port-blocking network
devices that may be blocking the necessary UDP port information.
point on UDP port 37540 if you selected b/g or on UDP port 37550 if you selected
a/n during preceding setup steps. If connection problems occur, verify that you
can ping the CleanAir access point and that there are no port-blocking network
devices that may be blocking the necessary UDP port information.
25