Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Guide De Montage

PoE is available on the following ports:

Use the following table to determine the total power budget available for 
all devices on your particular model of switch.

Verify that a computer with Microsoft Internet Explorer (version 6 and 
higher) or Firefox (version 2.0 or higher) is available.

The switch can be accessed and managed by two different methods; over 
your IP network using the web-based interface, or by the CLI through the 
console port. Using the console port requires advanced skills.

The switch works with Cisco Small Business network tools and services 
including the Cisco FindIT Network Discovery Utility that enables you to 
automatically discovers all supported Cisco Small Business devices in the 
same local network segment as your PC. You can get a snapshot view of 
each device or launch the product configuration utility to view and 
configure the settings. For more information, see 

.

To access the switch with a web-based interface, you must know the IP 
address the switch is using. The default configuration of the switch is to 
use its factory default IP address of 192.168.1.254 until it has obtained an 
IP address from a DHCP server.

SF200E-24P

1—6 and 13—18

SF200E-48P

1—12 and 25—36

SF200E-24P

100 Watts

SF200E-48P

180 Watts