Cisco Cisco SG200-26P 26-port Gigabit PoE Smart Switch Manuel De Maintenance

LLDP-MED

Cisco Small Business SF200E Series Advanced Smart Switch

92

 

Click Apply. Your changes are saved to the Running Configuration.

The LLDP for Media Endpoint Devices (LLDP-MED) protocol provides extensions 
to the LLDP standard for network configuration and policy, device location, Power-
over-Ethernet management, and inventory management.

Use the LLDP-MED Port Settings page to view and configure LLDP-MED 
operation on ports.

To configure these settings on a port:

Click Administration > Discovery - LLDP-MED > LLDP-MED Port Settings in the 
navigation window.

Each entry in the LLDP-MED Port Settings Table displays the LLDP-MED 
configuration for a port. 

Select a port to configure and click Edit.

Specify the following for the selected port:

•

LLDP-MED Status—Select to enable LLDP-MED operation on the port.

•

Configuration Notification—Select to enable the switch to send 
notifications when there are topology changes on the network.

Select the Available TLVs that you want the port to include in LLDP 
advertisements:

•

Network Policy—VLAN ID, the 802.1p class-of-service value, and the 
Differentiated Services Code Point (DSCP) value. This information is used to 
implement the Voice VLAN feature (see 

•

Location—This value could include the hexadecimal GPS location 
coordinates for the switch, the civic address, or the ELIN address depending 
upon what is configured in 

•

PSE—Indicates whether the port advertises itself as Power Sourcing 
Equipment capable of providing power to a connected Power-over Ethernet 
device. This option appears only on switches that include the PoE features.