Cisco Cisco Packet Data Interworking Function (PDIF) Guide De Dépannage
AAA Server Group Configuration Mode Commands
radius accounting rp ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
Important:
If the
command is executed without any of the optional keywords, all custom options are
disabled.
disabled.
: Specifies the use of Standard RADIUS accounting policy for R-P in accordance with IS-
835B.
Specifies that a stop/start RADIUS accounting pair should be sent to the RADIUS server when an applicable
R-P event occurs.
R-P event occurs.
Usage
Use this command to configure the events for which a RADIUS event is sent to the server when the
accounting procedures vary between servers.
accounting procedures vary between servers.
Example
The following command enables an R-P event (and therefore a RADIUS accounting event) when an Active-Stop is
received from the PCF:
The following command enables an R-P event (and therefore a RADIUS accounting event) when an Active-Stop is
received from the PCF:
The following command generates the STOP only when active-stop received from the old PCF when handoff occurs: